??????

Chinese | English

Product center

  • PCL foam generator

    Model: PCL16

    Working pressure range: 0.4 ~ 0.6Mpa

    Flow: 16L / S

    Flow coefficient: 429

    Foaming multiple: 5.0 (minimum value)

    25% liquid analysis time: 2.1min (minimum value)

    The PCL air foam generator is mainly composed of a shell, a foam nozzle and a guide plate.
    When the mixed liquid flows through the foam nozzle, a diffused atomized jet is formed, which generates a negative pressure around it, thereby sucking a large amount of air to form an air foam. Air foam nozzles and guide plates are input into the storage tank, drip down the tank wall, and cover the combustion liquid surface smoothly for fire extinguishing.

  • PC series foam generator

    Model specifications: PC8

    Working pressure range: 0.35 ~ 0.65Mpa

    Flow: 8L / S

    Flow coefficient: 215

    Foaming multiple: 5.1 (minimum value)

    25% liquid analysis time: 3.0min (minimum value)

    The PC air foam generator is mainly composed of a shell, a foam nozzle and a guide plate.
    When the mixed liquid flows through the foam nozzle, a diffused atomized jet is formed, which generates a negative pressure around it, thereby sucking a large amount of air to form an air foam. Air foam nozzles and guide plates are input into the storage tank, drip down the tank wall, and cover the combustion liquid surface smoothly for fire extinguishing.


  • Medium multiple foam gun

    Flow: 8L / S

    Rated working pressure: 0.6Mpa

    Range: ?12m

    Foaming multiple: 70: 1

    50% liquid analysis time: ?5min

    Valve type: aluminum alloy ball valve

    Main material: stainless steel foam tube, aluminum alloy gun body

    Interface size: 1.5 / 2 inch


  • QP16 Low Multiple Foam Gun

    The air foam gun is composed of a barrel, a hand wheel, a gun body, a ball valve, a suction pipe and a KY65 pipe interface. The air foam gun uses the orifice to make the vacuum pressure difference generated by the water flow rate suck the foam liquid, and mix it with the air to produce air foam to extinguish the fire. Because of its good performance, light and flexible, easy to use, air foam guns are widely used to extinguish class A, B, and C liquid fires or spray water for general solid fires.

  • QP series low magnification foam gun

    The air foam gun is composed of a barrel, a hand wheel, a gun body, a ball valve, a suction pipe and a KY65 pipe interface. The air foam gun uses the orifice to make the vacuum pressure difference generated by the water flow rate suck the foam liquid, and mix it with the air to produce air foam to extinguish the fire. Because of its good performance, light and flexible, easy to use, air foam guns are widely used to extinguish class A, B, and C liquid fires or spray water for general solid fires.

    Model specifications and technical parameters

    model

    Rated injection pressure (Mpa) Rated mixed flow (L / S) Foam or water range (m) Working pressure range (Mpa)
    PQ4 0.7
    4 twenty four 0.6-0.8
    PQ8 8 28
    PQ16 16 32


  • Three water separator (spiral)

    Features

    · Good sealing

    · Aluminum ball valve, anti-freezing

    ???? Small opening torque and flexible operation

    · Surface hard anodizing treatment

  • Water filter

  • Fast interface (Japanese style)

  • DC spray water gun

    Name: DC spray water gun

    Model specifications: QLD6.0 / 6.5

    Interface caliber (mm): 65

    Working pressure (Mpa): 0.6

    DC range (m): > 30

    Spray range (m): > 13

    Spray angle adjustment: 0 ~ 100


  • PS30-50 manual fire monitor

    PS30-50

    Features

    · Aluminum gun body

    · Stainless steel double handle design

    · Tilt adopts brake belt design, reliable and effective

    · The gun flow is adjustable from 30 ~ 40 ~ 50, and the DC spray is adjustable.

    · Double bearing rotation mechanism, excellent stability and durability, especially suitable for frequent use

    · Optional manual drain valve, open drain valve after use to drain residual water

    The main technical parameters

    Flow: 30-40-50L / S

    Range: ?65m@1.0Mpa, flow rate 50L / S

    Rated working pressure: 1.0Mpa Maximum working pressure: 1.6Mpa

    Main materials: aluminum alloy, copper and bearing steel

    Adjustment angle: 360 horizontally, -45 ~ 90 up and down, maximum spray angle 120

    Water inlet size: DN100 flange GB

    Nozzle type: manual adjustment (adjustable three-speed flow, adjustable DC spray)

    Weight: 16 kg Certificate: CCCF


  • DC switch water gun

    DC water gun: The water jet sprayed by the DC water gun is cylindrical, with long range, large flow and strong impact force. It is used to extinguish general solid material fires and auxiliary cooling when extinguishing fires. Generally can be divided into ordinary DC water gun down switch DC water gun. Switch DC water gun is composed of ball valve switch and other components. The water flow can be controlled by the switch.

  • Self-defense multi-use water gun

    Multi-use water gun: it can spray DC jet and mist jet to form water curtain protection, combined use, good maneuverability and good adaptability to fire field

?????? ??? 2 3 4 5 6 ??? ???? Total 6 pages Pages: 5/6 pages First Prev 2 3 4 5 6 Next Last Go
Sxfire privacy Sitemap

Find us

Shengxin Fire-Headquarters

Industrial Concentration Zone, Sandou Town, Gaoyou City

Jiangsu Province, China 225600

T: +86 (0514-84845308)

Select dealer